|
The components supplied with the system
Geiger’s Re-Centering Solution is a system that enables wood turners to drill a shallow hole that is absolutely centered on the waste stock of a work piece. The hole will subsequently be used to re-center the blank when jamb chucking or vacuum chucking. A re-centering pin is supplied to replace the center point of a One Way or Jet live center. This pin is used to establish and maintain the position of the blank when jamb or vacuum chucking. It's a quick, easy and very accurate way to re-center your work. You'll use it every time you turn!
Pick one of the following three sizes:
Left to right: M33 3.5, 1-1/4” X 8 and 1” X 8
| View instructions
for Geiger's Re-Centering Solution in .PDF format |
|
| Chuck Set Up Instructions | Faceplate Set Up Instructions |
Total system price: $64.95 (FL residents add $4.38 tax) + $8.00 shipping We accept Visa, MasterCard, Discover and checks. All orders may be placed via telephone, at 352-472-5035 If you have any questions, please call Don Geiger at: 352-472-5035 or E-mail: [email protected] |